Sujet : Re: Survivor!
De : cd (at) *nospam* notformail.com (Cursitor Doom)
Groupes : sci.electronics.designDate : 20. Mar 2024, 20:08:32
Autres entêtes
Organisation : A noiseless patient Spider
Message-ID : <5c9mviptoqk9pbcar4sdadb46f6deugk14@4ax.com>
References : 1 2 3
User-Agent : ForteAgent/8.00.32.1272
On Wed, 20 Mar 2024 08:19:52 -0700, John Robertson <
jrr@flippers.com>
wrote:
On 2024/03/20 2:45 a.m., Liz Tuddenham wrote:
Cursitor Doom <cd@notformail.com> wrote:
Hi all,
>
Just a quick one. But first, I'd just like to reiterate that I'm
noting your comments on the ripple thread and will deal with them in
due course when i have a couple of hours to spare next Sunday.
Yesterday I had 2 minutes to waste so I blew up another electrolytic
capacitor - or rather I *tried* to. A 10uF 10V cap across the output
of a variac with Vo set to 240VAC. There was a considerable *pop* but
no bang and it turned out the T3.15 Amp fuse in the variac had blown
spectacularly - but the cap had survived unscathed! Tested fine for
capacitance and ESR! I never would have believed it. Just wondering
how the hell it didn't get destroyed...
It's only doing it to annoy you. Make sure it is run well within its
ratings and put it on a board that has to be buried several layers deep
in some complicated equipment and is rivetted in place. It will fail
in no time at all and probably take several other valuable components
with it.
>
Lots of parts can be forced way past their rated maximums and suffer
internal damage that won't then show for a period of time in normal use.
>
That's why we have fuses, TSVs, MOVs, etc to help protect against spikes
and their aftereffects.
>
The only way to find what happened to the cap is to take the capacitor
apart and study the elements under a microscope for punctures and do a
chemical analysis on the electrolyte.
>
This is just A-Waste-Of-Time experiment and I can't believe I am
commenting on it...
Yeah, well you did. Incidentally, why are you Canadians so desperately
*dull*? It's like you have no sense of fun at all. You remind me of
that fellow Paul Carlson (Youtube, 'Mr. Carlson's Lab' is his
channel). Never seen him smile once in all the videos he's ever
released.