Re: Tonights Tradeoff - Background Execution Buffers

On Tue, 24 Sep 2024 20:03:29 +0000, Robert Finch wrote:

Under construction: Q+ background execution buffers for the block memory
operations. For instance, a block store operation can be executed in the
background while other instructions are executing. Store operations are
issued when the MEM unit is not busy. Background instructions continue
to execute even when interrupts occur. The background operations may be
useful for initializing blocks of memory that are not needed right-away.
When the operation is issued a handle for the buffer is returned in the
destination register so that the status of the operation may be queried,
or the operation cancelled.

This is how My 66000 performs:: LDM, STM, ENTER, EXIT, MM, and MS.
Addresses are AGENED and then a state machine over in the memory
unit performs the required steps. {{Not usefully different than the
divider performing the individual steps of division.}} While the
unit performs its duties, other units can be fed and complete
other instructions.
You just have to mark the affected registers to prevent hazards.