Re: Simple way for web to execute root shell script.

On 27/05/2025 21:44, druck wrote:

On 26/05/2025 09:27, Anssi Saari wrote:

The Natural Philosopher <tnp@invalid.invalid> writes:

Sadly USB attached SSDS do not show up...

>
I suppose it needs support from the drives and whatever USB-ATA
translator is in use. Seems a little odd though that smartctl works and
this doesn't.

 There are parameters you can supply which may allow it to work. Do a lsusb to get the adapter name and search for it and smartctl. If it's a must have get another adapter which is known to work with smartctl.
 

It does work with smartcl, Not with lm-sensors
#sensors
cpu_thermal-virtual-0
Adapter: Virtual device
temp1:        +55.5°C
rpi_volt-isa-0000
Adapter: ISA adapter
in0:              N/A
but
#smartctl -a /dev/sda | grep -i temp
194 Temperature_Celsius     0x0022   061   050   000    Old_age   Always        -       39 (Min/Max 16/50)
--
“it should be clear by now to everyone that activist environmentalism (or environmental activism) is becoming a general ideology about humans, about their freedom, about the relationship between the individual and the state, and about the manipulation of people under the guise of a 'noble' idea. It is not an honest pursuit of 'sustainable development,' a matter of elementary environmental protection, or a search for rational mechanisms designed to achieve a healthy environment. Yet things do occur that make you shake your head and remind yourself that you live neither in Joseph Stalin’s Communist era, nor in the Orwellian utopia of 1984.”
Vaclav Klaus