Liste des Groupes | Revenir à col misc |
In comp.os.linux.misc The Natural Philosopher <tnp@invalid.invalid> wrote:No. They are 2TB SSDsThe drives in question will be in an enclosure with the fanless Pi 4,Take note of the fact that drives (I'm assuming by 'drives' you mean
and so far have peaked at over 60°C when they are rated only up to
70°C ambient.
'spinning rust') often have much longer lifetimes if they are kept
cool.
You may want to find a way to rig a fan to provide some airflow overSince I will be printing the case it all goes in, if it needs a fan I can add one
those drives (it is amazing how much difference even a small airflow
will make).
For noise abatement on the fan, one of the easiest ways to reduce fan
noise is to run a 12v fan on 7v. Most of them will start and run (at a
much lower RPM) on 7v. And you get 7v by connecting the fan positive
to the PSU 12v rail and the fan negative to the 5v rail (if you have
'spinning rust' drives then you have 12v and 5v supply rails for the
drives).
Les messages affichés proviennent d'usenet.