Re: Getting along without a keyboard

On 15/09/2024 23:37, bp@www.zefox.net wrote:

Chris Green <cl@isbd.net> wrote:

3 - Is the Pi2 connected to the same network/router as the Pi5? >

The DHCP range is limited to 192.168.1.nnn, with no distinction between
wired and wireless connections. There's clearly bridging from wirless to
wired devices such as the printer, which works and can be pinged.

Unfortunately at one location I have to use an externally managed router/AP which bridges wireless and wired networks, but not between 2.4GHz and 5GHz WiFi.
I couldn't talk to a Pi Zero which only uses 2.4GHz from the laptop which had connected to 5GHz. I had to go via another Raspberry Pi which was connected by Ethernet and could see devices both WiFi frequencies.
---druck