Liste des Groupes | Revenir à cs raspberry-pi |
In article <vcca63$3je29$3@dont-email.me>,Given that few of us have internet connections over 100Mbps, that hardly seems an issue
The Natural Philosopher <tnp@invalid.invalid> wrote:On 17/09/2024 16:08, Scott Alfter wrote:You're stuck with USB network adapters if you use a Pi 4. With a CM4, thereIn article <vcbji2$3evhe$4@dont-email.me>,>
The Natural Philosopher <tnp@invalid.invalid> wrote:Moral. Get a decent router so at least you can eliminate it from your>
problems
Another recommendation: Look for something that can run OpenWRT, so you're
not stuck with whatever firmware the router manufacturer provides.
>
A third recommendation: a Raspberry Pi Compute Module 4 and a carrier board
that adds a second Ethernet port make a pretty good platform to run OpenWRT.
The CPU and memory on the CM4 will blow the doors off of most of the routers
you'd likely buy for home use, and I suspect they're competitive with nearly
anything short of rack-mountable enterprise-grade routers. The onboard WiFi
(on models so equipped) probably isn't so hot, but it's a solid option for
wired connections up to at least gigabit speeds and WiFi can be provided
with a separate access point or a USB dongle.
>
Why a compute module especially?
Wouldn't e.g. a Pi4 be just as good?
are carrier boards that route the built-in Ethernet to one port and connect
a second port over PCIe. This is the one I use:
https://wiki.dfrobot.com/Compute_Module_4_IoT_Router_Board_Mini_SKU_DFR0767--
Les messages affichés proviennent d'usenet.