Sujet : Re: Setting a manual IP address
De : knute2024 (at) *nospam* 585ranch.com (Knute Johnson)
Groupes : comp.sys.raspberry-piDate : 14. May 2024, 21:31:48
Autres entêtes
Organisation : A noiseless patient Spider
Message-ID : <v20hnk$che5$1@dont-email.me>
References : 1
User-Agent : Mozilla Thunderbird
On 5/14/24 13:44, bp@
www.zefox.net wrote:
What's the easiest way to manually set a RasPiOS host's
IP address? Raspi-config offers DHCP or networkmanager,
but neither invites manual intervention.
I've used DHCP up to now, but want to mess with a wireless
ethernt bridge to see if I can improve my WiFi connectivity.
To do that I need to manually set the Pi address on the wired
side so as to access the setup interface on the bridge.
If anybody's got pointers please post!
Thanks for reading,
bob prohaska
If you have a desktop use the NetworkManager to set your static IP. Click on the Up/Down Arrows on the -> Advanced Options -> Edit Connections, select the wired connection you want to change and then click the IPv4 tab and set a static IP address.
If you don't have a desktop use nmtui from the command line. It has a character interface similar to raspi-config. If you need further instructions on nmtui, post again.
-- Knute Johnson
Setting a manual IP address
Re: Setting a manual IP address
