Liste des Groupes | Revenir à cs raspberry-pi |
On 15/09/2024 23:37, bp@www.zefox.net wrote:That's AP Isolation at work. It stops Wifi devices communicating with each. The idea is if you have lots of guest devices connecting, AP Isolation stops them talking direct to each other and is meant to limit a rogue guest device ability to do bad things to other guests.Chris Green <cl@isbd.net> wrote:Unfortunately at one location I have to use an externally managed router/AP which bridges wireless and wired networks, but not between 2.4GHz and 5GHz WiFi.3 - Is the Pi2 connected to the same network/router as the Pi5?The DHCP range is limited to 192.168.1.nnn, with no distinction between
wired and wireless connections. There's clearly bridging from wirless to
wired devices such as the printer, which works and can be pinged.
I couldn't talk to a Pi Zero which only uses 2.4GHz from the laptop which had connected to 5GHz. I had to go via another Raspberry Pi which was connected by Ethernet and could see devices both WiFi frequencies.
---druck
Les messages affichés proviennent d'usenet.