Re: unsuccessfully install of printer brother hl-l2360dw

Salvador Mirzo <smirzo@example.com> writes:

Matthias Meyser <Meyser@xenet.de> writes:
>

Am 27.12.2024 um 15:55 schrieb Matthias Meyser:

This ist a PCL Printer.
see
https://docs.freebsd.org/de/books/handbook/printing/#printing-lpd-filters-ps2pcl
 

>
in english :)
>
https://docs.freebsd.org/en/books/handbook/printing/#printing-lpd-filters-ps2pcl

>
Thank you so much.  That allows me to use lpd and it's working.  The
handbook test was successful and I just asked Firefox to print a text
document using /usr/bin/lpr (using my /etc/printcap entry).  It worked!
>
I would still like to understand what's going on with CUPS, so I will
continue the troubleshooting but I'm very happy that I can print just
fine with lpd.

I found the FreeBSD package called print/brlaser.  It gives a driver to
CUPS that matches the printer Brother HL-L2360DW exactly.  Now I can
print with CUPS as well.  But there's still one thing that I cannot do
that is to print on two sides of the paper using the flip on long edge
option.  I'm printing on both sides just fine, but no matter what I do
it always comes out with flip on short edge.  I wonder if anyone knows
anything I could do.  My desire nearly 100% of the times is to print
two-sided with flip-on-long-edge, so if I could somehow set the printer
to always do this, that'd be right nearly 100%.

I found a file at

  /usr/local/etc/cups/ppd/Brother_HL-L2360D_series.ppd

that has the content below.  I don't know how to change this file, but
perhaps it could be of some hope.  (I'm also showing my CUPS
configuration below, but I suppose it's not relevant.)

--8<-------------------------------------------------------->8---
*PPD-Adobe: "4.3"
*%%%% PPD file for HL-L2360D series with CUPS.
*%%%% Created by the CUPS PPD Compiler CUPS v2.4.11.
*FormatVersion: "4.3"
*FileVersion: "6"
*LanguageVersion: English
*LanguageEncoding: ISOLatin1
*PCFileName: "brl2360d.ppd"
*Product: "(HL-L2360D series)"
*Manufacturer: "Brother"
*ModelName: "Brother HL-L2360D series"
*ShortNickName: "Brother HL-L2360D series"
*NickName: "Brother HL-L2360D series, using brlaser v6"
*PSVersion: "(3010.000) 0"
*LanguageLevel: "3"
*ColorDevice: False
*DefaultColorSpace: Gray
*FileSystem: False
*Throughput: "1"
*LandscapeOrientation: Plus90
*TTRasterizer: Type42
*% Driver-defined attributes...
*1284DeviceID: "MFG:Brother;CMD:PJL,PCL,PCLXL,URF;MDL:HL-L2360D series;CLS:PRINTER;CID:Brother Laser Type1;URF:W8,CP1,IS4-1,MT1-3-4-5-8,OB10,PQ4,RS300-600,V1.3,DM1;"
*cupsBackSide: "Rotated"
*cupsVersion: 2.4
*cupsModelNumber: 0
*cupsManualCopies: False
*cupsFilter: "application/vnd.cups-raster 33 rastertobrlaser"
*cupsLanguages: "en"
*OpenUI *PageSize/Media Size: PickOne
*OrderDependency: 10 AnySetup *PageSize
*DefaultPageSize: A4
*PageSize A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageSize A5/A5: "<</PageSize[420 595]/ImagingBBox null>>setpagedevice"
*PageSize A6/A6: "<</PageSize[297 420]/ImagingBBox null>>setpagedevice"
*PageSize B5/JIS B5: "<</PageSize[516 729]/ImagingBBox null>>setpagedevice"
*PageSize B6/JIS B6: "<</PageSize[363 516]/ImagingBBox null>>setpagedevice"
*PageSize EnvC5/Envelope C5: "<</PageSize[459 649]/ImagingBBox null>>setpagedevice"
*PageSize EnvMonarch/Envelope Monarch: "<</PageSize[279 540]/ImagingBBox null>>setpagedevice"
*PageSize EnvDL/Envelope DL: "<</PageSize[312 624]/ImagingBBox null>>setpagedevice"
*PageSize Executive/Executive: "<</PageSize[522 756]/ImagingBBox null>>setpagedevice"
*PageSize Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageSize Letter/US Letter: "<</PageSize[612 792]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageSize
*OpenUI *PageRegion/Media Size: PickOne
*OrderDependency: 10 AnySetup *PageRegion
*DefaultPageRegion: A4
*PageRegion A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageRegion A5/A5: "<</PageSize[420 595]/ImagingBBox null>>setpagedevice"
*PageRegion A6/A6: "<</PageSize[297 420]/ImagingBBox null>>setpagedevice"
*PageRegion B5/JIS B5: "<</PageSize[516 729]/ImagingBBox null>>setpagedevice"
*PageRegion B6/JIS B6: "<</PageSize[363 516]/ImagingBBox null>>setpagedevice"
*PageRegion EnvC5/Envelope C5: "<</PageSize[459 649]/ImagingBBox null>>setpagedevice"
*PageRegion EnvMonarch/Envelope Monarch: "<</PageSize[279 540]/ImagingBBox null>>setpagedevice"
*PageRegion EnvDL/Envelope DL: "<</PageSize[312 624]/ImagingBBox null>>setpagedevice"
*PageRegion Executive/Executive: "<</PageSize[522 756]/ImagingBBox null>>setpagedevice"
*PageRegion Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageRegion Letter/US Letter: "<</PageSize[612 792]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageRegion
*DefaultImageableArea: A4
*ImageableArea A4/A4: "8 8 587 826"
*ImageableArea A5/A5: "8 8 412 579"
*ImageableArea A6/A6: "8 8 289 404"
*ImageableArea B5/JIS B5: "8 8 508 713"
*ImageableArea B6/JIS B6: "8 8 355 500"
*ImageableArea EnvC5/Envelope C5: "8 8 451 633"
*ImageableArea EnvMonarch/Envelope Monarch: "8 8 271 524"
*ImageableArea EnvDL/Envelope DL: "8 8 304 608"
*ImageableArea Executive/Executive: "8 8 514 740"
*ImageableArea Legal/US Legal: "8 8 604 992"
*ImageableArea Letter/US Letter: "8 8 604 776"
*DefaultPaperDimension: A4
*PaperDimension A4/A4: "595 842"
*PaperDimension A5/A5: "420 595"
*PaperDimension A6/A6: "297 420"
*PaperDimension B5/JIS B5: "516 729"
*PaperDimension B6/JIS B6: "363 516"
*PaperDimension EnvC5/Envelope C5: "459 649"
*PaperDimension EnvMonarch/Envelope Monarch: "279 540"
*PaperDimension EnvDL/Envelope DL: "312 624"
*PaperDimension Executive/Executive: "522 756"
*PaperDimension Legal/US Legal: "612 1008"
*PaperDimension Letter/US Letter: "612 792"
*OpenUI *Resolution/Resolution: PickOne
*OrderDependency: 10 AnySetup *Resolution
*DefaultResolution: 600dpi
*Resolution 600dpi/600 DPI: "<</HWResolution[600 600]/cupsBitsPerColor 1/cupsRowCount 0/cupsRowFeed 0/cupsRowStep 0/cupsColorSpace 3>>setpagedevice"
*Resolution 1200dpi/1200HQ: "<</HWResolution[1200 1200]/cupsBitsPerColor 1/cupsRowCount 0/cupsRowFeed 0/cupsRowStep 0/cupsColorSpace 3>>setpagedevice"
*CloseUI: *Resolution
*OpenUI *InputSlot/Media Source: PickOne
*OrderDependency: 10 AnySetup *InputSlot
*DefaultInputSlot: Auto
*InputSlot Auto/Auto-select: "<</MediaPosition 0>>setpagedevice"
*InputSlot Tray1/Tray 1: "<</MediaPosition 1>>setpagedevice"
*InputSlot Tray2/Tray 2: "<</MediaPosition 2>>setpagedevice"
*InputSlot Tray3/Tray 3: "<</MediaPosition 3>>setpagedevice"
*InputSlot MPTray/MP Tray: "<</MediaPosition 4>>setpagedevice"
*InputSlot Manual/Manual: "<</MediaPosition 5>>setpagedevice"
*CloseUI: *InputSlot
*OpenUI *MediaType/Media Type: PickOne
*OrderDependency: 10 AnySetup *MediaType
*DefaultMediaType: PLAIN
*MediaType PLAIN/Plain paper: "<</MediaType(PLAIN)/cupsMediaType 0>>setpagedevice"
*MediaType THIN/Thin paper: "<</MediaType(THIN)/cupsMediaType 1>>setpagedevice"
*MediaType THICK/Thick paper: "<</MediaType(THICK)/cupsMediaType 2>>setpagedevice"
*MediaType THICKER/Thicker paper: "<</MediaType(THICKER)/cupsMediaType 3>>setpagedevice"
*MediaType BOND/Bond paper: "<</MediaType(BOND)/cupsMediaType 4>>setpagedevice"
*MediaType TRANS/Transparencies: "<</MediaType(TRANS)/cupsMediaType 5>>setpagedevice"
*MediaType ENV/Envelopes: "<</MediaType(ENV)/cupsMediaType 6>>setpagedevice"
*MediaType ENV-THICK/Thick envelopes: "<</MediaType(ENV-THICK)/cupsMediaType 7>>setpagedevice"
*MediaType ENV-THIN/Thin envelopes: "<</MediaType(ENV-THIN)/cupsMediaType 8>>setpagedevice"
*CloseUI: *MediaType
*OpenUI *brlaserEconomode/Toner save mode: Boolean
*OrderDependency: 10 AnySetup *brlaserEconomode
*DefaultbrlaserEconomode: False
*brlaserEconomode False/Off: "<</cupsInteger10 0>>setpagedevice"
*brlaserEconomode True/On: "<</cupsInteger10 1>>setpagedevice"
*CloseUI: *brlaserEconomode
*OpenUI *Duplex/2-Sided Printing: PickOne
*OrderDependency: 10 AnySetup *Duplex
*DefaultDuplex: None
*Duplex None/Off (1-Sided): "<</Duplex false>>setpagedevice"
*Duplex DuplexNoTumble/Long-Edge (Portrait): "<</Duplex true/Tumble false>>setpagedevice"
*Duplex DuplexTumble/Short-Edge (Landscape): "<</Duplex true/Tumble true>>setpagedevice"
*CloseUI: *Duplex
*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(1.05)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(1.05)" Standard ROM
*Font AvantGarde-Demi: Standard "(1.05)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(1.05)" Standard ROM
*Font Bookman-Demi: Standard "(1.05)" Standard ROM
*Font Bookman-DemiItalic: Standard "(1.05)" Standard ROM
*Font Bookman-Light: Standard "(1.05)" Standard ROM
*Font Bookman-LightItalic: Standard "(1.05)" Standard ROM
*Font Courier: Standard "(1.05)" Standard ROM
*Font Courier-Bold: Standard "(1.05)" Standard ROM
*Font Courier-BoldOblique: Standard "(1.05)" Standard ROM
*Font Courier-Oblique: Standard "(1.05)" Standard ROM
*Font Helvetica: Standard "(1.05)" Standard ROM
*Font Helvetica-Bold: Standard "(1.05)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(1.05)" Standard ROM
*Font Helvetica-Narrow: Standard "(1.05)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(1.05)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(1.05)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(1.05)" Standard ROM
*Font Helvetica-Oblique: Standard "(1.05)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(1.05)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(1.05)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(1.05)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(1.05)" Standard ROM
*Font Palatino-Bold: Standard "(1.05)" Standard ROM
*Font Palatino-BoldItalic: Standard "(1.05)" Standard ROM
*Font Palatino-Italic: Standard "(1.05)" Standard ROM
*Font Palatino-Roman: Standard "(1.05)" Standard ROM
*Font Symbol: Special "(001.005)" Special ROM
*Font Times-Bold: Standard "(1.05)" Standard ROM
*Font Times-BoldItalic: Standard "(1.05)" Standard ROM
*Font Times-Italic: Standard "(1.05)" Standard ROM
*Font Times-Roman: Standard "(1.05)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(1.05)" Standard ROM
*Font ZapfDingbats: Special "(001.005)" Special ROM
*% End of brl2360d.ppd, 08482 bytes.
--8<-------------------------------------------------------->8---

(*) CUPS Configuration File, likely irrelevant

LogLevel debug
PageLogFormat
MaxLogSize 1m
ErrorPolicy stop-printer
Port 631
Listen /var/run/cups/cups.sock
Browsing On
BrowseLocalProtocols dnssd
DefaultAuthType Basic
WebInterface Yes
<Location />
  Order allow,deny
  Allow all
</Location>
<Location /admin>
  AuthType Default
  Require user @SYSTEM
  Order allow,deny
  Allow all
</Location>
<Location /admin/conf>
  AuthType Default
  Require user @SYSTEM
  Order allow,deny
  Allow all
</Location>
<Location /admin/log>
  AuthType Default
  Require user @SYSTEM
  Order allow,deny
  Allow all
</Location>
<Policy default>
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    Order deny,allow
  </Limit>
  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit CUPS-Get-Document>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  <Limit CUPS-Authenticate-Job>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit All>
    Order deny,allow
  </Limit>
</Policy>
<Policy authenticated>
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    AuthType Default
    Order deny,allow
  </Limit>
  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  <Limit Cancel-Job CUPS-Authenticate-Job>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit All>
    Order deny,allow
  </Limit>
</Policy>
<Policy kerberos>
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    AuthType Negotiate
    Order deny,allow
  </Limit>
  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    AuthType Negotiate
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  <Limit Cancel-Job CUPS-Authenticate-Job>
    AuthType Negotiate
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit All>
    Order deny,allow
  </Limit>
</Policy>
BrowseWebIF Yes