Re: Machine Shop

On Sun, 23 Feb 2025 07:26:05 +0700, John B. <slocombjb@gmail.com>
wrote:

On Sat, 22 Feb 2025 13:06:13 -0800, Jeff Liebermann <jeffl@cruzio.com>
wrote:
>

On Sat, 22 Feb 2025 19:58:29 GMT, cyclintom <cyclintom@yahoo.com>
wrote:
>

On Fri Nov 8 14:03:46 2024 Frank Krygowski  wrote:

It doesn't exist, Tom. You can't pop a dent out a bicycle frame tube by
riding the bike. Thinking you can is a sign of insanity.

>
If you have a slight dent in high performance steel. the tubing can revert to its natural shape under stress.

>
Tom.  The only steel that might do that is spring steel (1095, 1060,
1075, 1080, etc).  Bicycle frames are not made from spring steel.  If
they were made from spring steel, they would ride like the proverbial
wet noodle. 

>
Errr... 1095 is not "spring steel". At least not in the metal working
field. It is simply a high carbon steel and one common use is knife
blades and other cutting devices :-)

True, but I beg to differ slightly.  Wikipedia lists 1095 as "Blue, or
polished bright spring steel".  Same with McMaster-Carr catalog:
<https://en.wikipedia.org/wiki/Spring_steel>
<https://www.mcmaster.com/catalog/116/3630>

During the 1960's, I was working in my father's lingerie factory after
school.  We couldn't afford a resident toolmaker to build the sewing
machine attachments.  So, I was volunteered to do the work.  My father
took home a few tools and some stock including a box of assorted coils
of spring steel.  When he died in 1995(?), I inherited the tools and
metal stock which included some 1095 coils and scrap.

However, it seems that it's also suitable for knives.  I know a little
about knife making and sharpening.  I made one knife from a kit:
<https://www.knifekits.com>
I do fairly well (for a beginner) at sharpening.  1095 is considered a
good steel for knifemaking because of it's edge retention.  It's most
suitable for survival knives.  1095 has no corrosion resistance and
therefore poor edge retention in corrosive environments:
<https://www.bladehq.com/blog/knife-steel-guide#1095>

For bicycle frame use, it could probably survive a crash, but will
corrode away in the first rain.  If the tubing were thin enough, it
might be springy enough for self healing dents.  However, the same
springiness will also provide a springy ride.

--
Jeff Liebermann                 jeffl@cruzio.com
PO Box 272      http://www.LearnByDestroying.com
Ben Lomond CA 95005-0272
Skype: JeffLiebermann      AE6KS    831-336-2558