Sujet : Re: GRX Bleeding.
De : am (at) *nospam* yellowjersey.org (AMuzi)
Groupes : rec.bicycles.techDate : 02. Mar 2025, 18:20:56
Autres entêtes
Organisation : Yellow Jersey, Ltd.
Message-ID : <vq241q$s548$2@dont-email.me>
References : 1
User-Agent : Mozilla Thunderbird
On 3/2/2025 11:16 AM, cyclintom wrote:
I have no leaks anywhere but the rear GRX in particualr will not bleed correctly. I will try tilting the bike in the stand so that any air in the system will find its way to the lever. The Tektro set of brakes I had had this problem but leaving it lay overnight allowed air bubbles to work their way out of it and it worked fine after that.
Remove the rear caliper so it hangs well below the rest of the system. Rap the caliper lightly while you're pushing fluid through, up to the lever. The way the rear caliper is mounted, the line dips down from the caliper before rising up to the lever. Air in the caliper won't move without some encouragement
-- Andrew Muziam@yellowjersey.orgOpen every day since 1 April, 1971
Re: GRX Bleeding.
Re: GRX Bleeding.