Re: Machine Shop

On 3/4/2025 3:06 PM, AMuzi wrote:

On 3/4/2025 11:03 AM, Frank Krygowski wrote:

On 3/4/2025 12:44 AM, AMuzi wrote:

>
For a typical dent, this Waterford for example:
http://www.yellowjersey.org/wfd12a.jpg
>
the tube is rolled to reform the greater part of the deformation:
>
http://www.yellowjersey.org/wfd12b.jpg
>
then the remaining low spots are filled with polyester bondo or with metal (brass, silver, lead. I use lead):
>
http://www.yellowjersey.org/wfd12c.jpg
>
and finished:
>
http://www.yellowjersey.org/wfd12e.jpg

>
Could you explain what's meant by "the tube is rolled"? As I said earlier, I'd thought the first step would be pushing a mandrel through (if the dent was in the seatpost) to partially push out the dent. Of course, that wouldn't work except on a seat tube, and I suppose would still require filling. Are you skipping that step entirely?
>
BTW, my antique BMW has a slight dent in the top of the gas tank, apparently from something falling onto it. I've heard of "paintless dent repair" for car bodies and wondered about it, but never looked deeply into it. I gather that some skilled body workers can do pretty well at pushing dents back out from the underside.
>

 Can't generally fit anything inside a bicycle frame tube in any reasonable time. Taking a frame apart is more than a magnitude of labor greater than the cost of a tube. Once apart, you'd just replace it rather than repair.
 Here's one set of steel blocks for rolling dents.
 http://www.yellowjersey.org/photosfromthepast/den24a.jpg

So how exactly are the blocks used? Are the blocks tightened in place and rotated around the tube?

 I have various diameters. On oval tube of course there are limited options. I generally don't take those jobs except where the dent is minimal:
 https://www.yellowjersey.org/photosfromthepast/denw25a.jpg

It occurred to me after posting that forcing a mandrel inside the tube might cause some of the metal around the dent to bulge outward. I can see why you wouldn't want that to happen.
--
- Frank Krygowski