Re: cordless tool 18V to 12V converter

Leon Fisk <lfiskgr@gmail.invalid> writes:

On Fri, 15 Mar 2024 13:31:43 +0000
Richard Smith <null@void.com> wrote:
>
<snip>

http://www.weldsmith.co.uk/tech/minerals/240314_rocksplit/240314_rocksplit_drill_feathers.html
"Rock-split granite with "cordless" SDS drill and "feathers""

>
Rich,
>
NICE job! You have a working solution to this problem👍
>
Forgive me... but my mind immediately went to why not make (or buy)
some larger feathers to fit the Pneumatic drill hole and maybe some
smaller feathers so your battery drill could use a smaller drill hole🤔

Not at all "forgive" - comment welcomed.

There are some large feathers for the 32mm to 34mm hole.
Thing is, from my observation, they work no better than the small
feathers on this granite.
Line of small holes with matching feathers is "it".

Problem is the compressor isn't running all the time.
Would be in a working mine, but this is a "hobby" mine.
Splitting rocks and clearing debris is like an infil job which comes
when it comes.
Takes several people and some time to get the compressor running.
Not going to happen when you find yourself with some time mid-way
through a club morning at the mine.

If I could make some wedges of the same taper but thinner, maybe could
come down to a 12mm / half-inch hole
Area-ratio, so proportional to diameter-squared
(/f (expt 14 2) (expt 12 2)) ;; 1.3611111111111112
(/f (expt 12 2) (expt 14 2)) ;; 0.7346938775510204
73% of the area.
Would be well worth having.

Yes absolutely {thumbs-up}

Best wishes, Rich Smith