Re: Arduino + MCP9600 + thermocouple help needed

"Leon Fisk"  wrote in message news:utcl2t$sio0$2@dont-email.me...
Really tedious but you could pull the retaining clips off the inner
plastic plunger and carefully pull them out along with the
metal contact strips. Use an eraser on those strips and similar on the
standing pins inside the shell they contacted with. Some silicone
grease used sparingly on the interlock bars...
Leon Fisk
------------------------------
Thanks. I was taught to use an ink eraser to clean contacts. The Army tool kits for telephone and Teletype repairmen included contact burnishers. The school concentrated on electronics, ciphony and Modems, and slighted the mechanical components.
https://jonard.com/contact-burnishers-burnisher-files