Re: OT: Finding a mechanical engine fan by dimensions

On Thu, 25 Apr 2024 21:40:17 -0000 (UTC)
<bp@www.zefox.net> wrote:

<snip>

One small discovery so far is that 3/32" teflon cord valve bonnet
packing seems to make a good water pump gasket. The paper gasket
wouldn't seal owing to warpage between pump and housing. 

Well, at least you're gaining on getting it running again👍

Probably already found this stuff, but just in case...

Description for this clutch mentions you'll likely have to replace the
fan:

https://scoutparts.com/Bolt_On_Fan_Clutch_500202c2_Scout_II_Scout_800_Travelall_Travelette_Pickup_Metro/p11856

Same place sells a fan that I suspect is what you need now. Has a
wicked price though.

https://scoutparts.com/18_Fan_Blade__Scout_II/p18325

This place seems to have the same fan but a bit cheaper:

https://www.superscoutspecialists.com/fan-blade-for-bolt-on-fan-clutch-scout-ii

Some numbers in the description for the pump and clutch it fits, likely
nothing that matches what you have though.

Thanks for the pictures, big help in better understanding the problem
you're having🙂

--
Leon Fisk
Grand Rapids  MI