Re: How long would it take you to 3D print this ABS plastic part?

"Bob La Londe"  wrote in message news:v7ubq9$2eb0o$1@dont-email.me...
On 7/25/2024 7:12 AM, Jim Wilkins wrote:

Do you know or have an estimate of the temperature and pressure to mold ABS?
>

"There are various considerations when melting and injecting ABS plastic
into a mold. For instance, the melt temperature varies between 170 and
320 °C based on the ABS and mold temperature. The injection molding
pressure also varies from 700 to 21800 psi."
https://www.google.com/amp/s/www.crescentind.com/blog/abs-injection-molding-benefits-and-process%3fhs_amp=true
I find that temperature hard to believe.  Most references give a high
temp of 440F to 480F.  There are a lot of factors that can affect
required pressure including temperature, mold design, and the shape and
volume of the net part.
Bob La Londe
-----------------------------------
Thanks. If I design something I have to plan for maximum values, which I can always turn down. The 4500# 20' log on the sawmill and hoist intended for 2000# and 12' is a constant reminder of the problems of increasing capacity.