Sujet : Re: QCTP tool blocks
De : Snag_one (at) *nospam* msn.com (Snag)
Groupes : rec.crafts.metalworkingDate : 26. Sep 2024, 23:07:49
Autres entêtes
Organisation : A noiseless patient Spider
Message-ID : <vd4lvm$cvi6$1@dont-email.me>
References : 1 2 3 4 5
User-Agent : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:60.0) Gecko/20100101 Thunderbird/60.9.1
On 9/26/2024 4:33 PM, Jim Wilkins wrote:
"Jim Wilkins" wrote in message news:vd3p9b$73cd$1@dont-email.me...
I just dug out my spare 5C collets to inventory them and found a pot collet
bored 2", exactly what I need to complete the steel bandsaw blade guide
rollers for the sawmill.
-------------------------------
The used 2" collet didn't feel right when tightened. Close examination showed flash from the saw cuts folded back on the taper, and compressed almost invisible. Stoning off the flash and raised metal around a ding let it close more normally.
I'm using the new 3" chuck right now to machine a slug for a veterinary syringe . I bought several at a yard sale with the idea of using them as oilers . The oil turned the barrel seals to goo so I'm machining an aluminum slug with an o-ring to replace the goo . Actually it'll have two , one to seal the plunger shaft and one for the barrel .
-- SnagVoting for Kamabla after Bidenis like changing your shirt becauseyou shit your pants .