Re: Current mirror version of the lowish distortion 1kHz sine wave osillator

"Don" <g@crcomp.net> wrote in message news:20250115a@crcomp.net...

Edward Rawde wrote:

Bill Sloman wrote:

This just reworks my circuit to use a controllable asymmetric current mirror instead of the FET for gain control. I take the
feedback from the full wave rectifier and switch every half-cycle to reconstruct a variable amplitude sine wave to control the
output amplitude. It does use a lot of components, but it strikes me as fairly comprehensible.
>

>
First I corrected the usual line wrap issues.
>
In the latest LTSpice (24.1.0) it took me a good hour or two to find out why I was getting strange netlist errors for all the
opamps
in the circuit.
>
This turned out to be .ENDS in the BAS70L model. Remove .ENDS and the issues go away.
>
So this is the circuit I'm simulating in 24.1.0 with no component updates available.
I'm expecting it to take 2 hours to complete.

>
Thank you for your tip to wait 2 hours for results. For what it's worth,
Bill's original LTSpice source worked for me "as is."

It did for me too, but because it looked like simulation time would be long I moved it to another machine I use over remote desktop.
On that machine LTSpice asked if I'd like the latest version so I upgraded to 24.1.0.
After the upgrade I got very strange netlist errors which didn't mention BAS70L and it took a while to figure out the cause.

I'm now revising the simulation time to a minimum of 4 days for 10 seconds.
24.1.0 seems to be faster.

>
Danke,
>
--
Don, KB7RPU, https://www.qsl.net/kb7rpu
There was a young lady named Bright Whose speed was far faster than light;
She set out one day In a relative way And returned on the previous night.