Re: high curent PCB connector

john larkin <JL@gct.com> wrote:

Does anyone have a favorite high-current PCB connector?
 
I'd like to get 20 wires into a pluggable connector, to go on a module
like this:
 
https://highlandtechnology.com/Product/P948
 
We need at least 7 amps per contact.
 
That litle green Phoenix connector is cool. Wires screw into it
without tooling, and it's easy to mate and unmate. But it's only 5
pins.
 
I was planning to use four of them, with two on a baby board, but that
idea wasn't popular.
 
 

Phoenix  do make 20 pin version (as two rows of ten) with 10 amp per pin on
200 mil pitch.

--
piglet