Re: 200V at 10mA

On 8/22/24 11:44, john larkin wrote:

On Thu, 22 Aug 2024 10:36:27 +0100, piglet <erichpwagner@hotmail.com>
wrote:
 

On 21/08/2024 17:39, Edward Rawde wrote:

SYMATTR InstName C5

>
If you want to stick with that way-over-complex design you could look
into versapac 6 windings coupled inductors.
>
I would not even try that circuit. Better to redesign to use either a
single inductor or a dual coupled inductor like DRQ127 series. if
necessary follow with a cockcroft-walton multiplying rectifier.
>
UC3843 control chip would be ideal, cheap, reliable, easy to use,
multisourced.
>
piglet

 I like the auto-flyback circuit, flyback drive into the center tap of
a DRQ127. Then maybe a voltage doubler to harvest the p-p swing.
 And LTC3803 rocks.
 https://www.dropbox.com/scl/fi/8jwi35owo41lfmonc8y92/LTC3803.jpg?rlkey=l3thy5h4533sxpd152ve24c26&raw=1
 

$0.15 for the first 60V, then the rest of the way with doublers
https://jlcpcb.com/partdetail/LegendSi-LGS6302EP/C5280693