Re: faster DDS clock

On 9/21/24 17:42, john larkin wrote:

On Fri, 20 Sep 2024 00:30:28 +0200, Lasse Langwadt <llc@fonz.dk>
wrote:
 

On 9/19/24 05:57, john larkin wrote:

On Thu, 19 Sep 2024 03:28:09 -0000 (UTC), Phil Hobbs
<pcdhSpamMeSenseless@electrooptical.net> wrote:
>

john larkin <JL@gct.com> wrote:

On Wed, 18 Sep 2024 21:56:59 -0000 (UTC), Phil Hobbs
<pcdhSpamMeSenseless@electrooptical.net> wrote:
>

john larkin <jl@650pot.com> wrote:

Assume a DAC being driven with an n-bit sine waveform at some clock
frequency, and then a lowpass filter and a comparator, generating a
programmable frequency clock.
>
Why not use both edges of the comparator output as our clock? That
de-stresses everything by 2:1, which could well be a net win on jitter
and such. Or gives twice the clock frequency with the same parts.
>
>

>
The usual trouble is that you have to get the other edge from somewhere. An
xor gate and an RC is typical.
>
Any asymmetry in the square wave turns into subharmonic jitter.
>
A 2:1 PLL would probably get my vote.

>

>
I'm trying to make things cheaper and simpler. I need a clock that's
programmable up to maybe 20 or 25 MHz, and it would be nice to use
some relatively cheap dual DACs.

>
Understood.  A Joergesque solution would be to use a discrete FET as part
of the RC + XOR, and dork the ON resistance to square up the duty cycle.
(He’d probably use a CD4007 DIY gate package to do a few at once. Maybe
it’s possible to use a TinyLogic inverter with VDD open.)
>
Cheers
>
Phil Hobbs

>
An LVDS line receiver would make a pretty good comparator, after the
filter.
>
If I have enough balls (no pun intended) I can use an LVDS input of my
FPGA. One could even servo that to exactly 50%.
>
I don't know if this FPGA could internally clock on both edges.
>
But I can get a TI DAC908 for under $5, so may just clock that fast,
brute force at 100 MHz or so. That would make 20 MHz with a dinky
filter.
>

>
this will give you 3x10bit@140MHZ DACs for about the same price
https://www.lcsc.com/product-detail/Digital-to-Analog-Converters-DAC_Analog-Devices-ADV7123KSTZ140-RL_C172724.html
>
or 3x8bit@330MHz
https://www.lcsc.com/product-detail/Digital-to-Analog-Converters-DAC_Analog-Devices-ADV7125JSTZ330_C662165.html
>
if you opt for the Chinese clone, less than half for 3x10bit@240MHz
https://www.lcsc.com/product-detail/Digital-to-Analog-Converters-DAC_HTCSEMI-HT7123ARQZ_C2886392.html
>
>
>
>
>

 It occurrs to me that the use for a 3-channel fast 10-bit DAC is to
drive a color CRT monitor, which I expect nobody makes any more.
 

It's for VGA (that's why it has sync and blank input)
While VGA is old I doubt it is going anywhere soon, it still widely used, go buy a server and it has VGA