Re: Low distortion sinewave oscillator without big capacitor.

"Edward Rawde" <invalid@invalid.invalid> wrote in message news:vsp86r$174f$1@nnrp.usenet.blueworldhosting.com...

"Bill Sloman" <bill.sloman@ieee.org> wrote in message news:vsnufh$2ou7j$1@dont-email.me...

On 4/04/2025 11:33 am, JM wrote:

On Thu, 3 Apr 2025 19:25:33 -0400, "Edward Rawde"
<invalid@invalid.invalid> wrote:
>

"JM" <sunaecoNoChoppedPork@gmail.com> wrote in message news:qq8tujlpciqc2jrd0ibljmjr9pd37ip6hi@4ax.com...

On Sun, 30 Mar 2025 14:54:56 -0400, "Edward Rawde"
<invalid@invalid.invalid> wrote:
>

Not long ago JM posted a 1KHz sinewave oscillator with very low distortion.
It used a 470uF non polarized capacitor which in practice would probably be made from two 1000uF capacitors.
There's nothing wrong with that but I wanted to see whether I could make a working circuit without needing such a large
capacitor.

>

You will need to adjust the feedback to suit.  Start with a -5 or -6
gain block after the integrator and adjust it's gain until the startup
is clean (no saturation).

>
Here's my version of John May's variation.
>

...

Just remove three wraps at line 407, keeping your horizontal scroll bar pushed to the left each time.
Now the last line should be 406 beginning with TEXT