Re: Cap C-V test

On 5/1/25 22:09, john larkin wrote:

 https://www.dropbox.com/scl/fi/a7425c69k3w8wx8tqjpq5/X110_CV_Test.jpg?rlkey=pc3c0b12ncswv6ajrn148stdk&raw=1
  The DUT is a Venkel 2.2 uF 100v 1812-size ceramic cap. I need to run
it at 48 volts. 0.8 uF is probably OK. I have room on my board so I
guess I'll add another cap in parallel.

or in series, I believe there are some automotive standards that call for that on high current lines because ceramics tend to fail short with mechanical stress