Sujet : Cell Phone Charging
De : Ed.Vance (at) *nospam* f10.n1.z11914.fidonet.org (Ed Vance)
Groupes : sci.electronics.repairDate : 08. Apr 2025, 21:24:43
Autres entêtes
Organisation : fsxNet Usenet Gateway
Message-ID : <744220597@f10.n1.z11914.fidonet.org>
User-Agent : VSoup v1.2.9.47Beta [95/NT]
When I was in High School I took a Electric class.
There was a 6Volt Battery , some assorted length wires with battery clips on
each end and some homemade Resistors with wire wrapped around a strip of
Bakelite.
The Teacher gave us Schematics showing Series,circuit to calculate the Voltage
and Current we should get when we assembled the circuit and then used a VOM to
see the readings on the circuit.
We were told to ALWAYS wire the circuit up first , connect the VOM and then put
the battery clips on the battery.
When I charge my ell phone I put the USB C plug in the jack on the phone and
then plug the other end in the A.C. socket.
When it is charged up I unplug the A.C. plug from the socket and remove the
USB C plug from the phone
I know it is only 5 Volts but I do it that way.
Most folks I see unplug the wire from their phone first , then unplug the A.C.
end.
Probably doesn't matter, but I'm set in my ways
Ed