Re: easy earbud battery replacement

On 2/26/25 4:45 AM, Liz Tuddenham wrote:

 Are the battery terminals dirty?  If an invisible film of corrosion has
built up on them, it can create all sorts of fizzing noises.
 The corrosion from alkaline batteries is hard, tenacious and incredibly
difficult to remove if you use conventional organic solvents and
cleaning agents.  The magic substance, which works wonders, is water: a
slightly damp cloth or cotton-wool bud softens the corrosion and wipes
it away.  Clean the terminals on both the battery and in the device,
then make sure they are completely dry before putting the battery back
in.
 

No, the terminals on both the new batteries and the old ones (when i put them back in) seem reasonably clean. And bluetooth is working.  I can see the signal working fine on boTH sets of cells and I can even get a remaining battery per cent reading!
But still no sound.