wrote:
3. a soldering iron with a quick to respond temperature controlled
tip. I use something like this:
<https://www.ebay.com/itm/366238915140>
Notice the "fast heatup" in the description. I don't need an 80 watt
iron for working on tiny SMD parts. What I need is a stable tip
temperature where the temperature doesn't drop when the tip hits the
work piece. 100 watts might be better, but I haven't tried one like
this:
<https://www.ebay.com/itm/306393210141>
OK, I lied. I excavated my soldering iron from the mess on my
workbench and discovered that it was actually 100 watts, not 80 watts.
Probably my faulty memory. Sorry.
I ran a quick test to see how fast it would become hot enough to
solder. Using the built in thermometer, it went from 23C (room temp)
to 360C (my soldering tip temp for 63/37 solder), in 38 seconds. That
sounds about right.
--
Jeff Liebermann jeffl@cruzio.com
PO Box 272 http://www.LearnByDestroying.com
Ben Lomond CA 95005-0272 AE6KS 831-336-2558
| Date | Sujet | # | Auteur | |
| 17 May 26 |  Re: someone else crimping or me soldering | 4 | Jeff Liebermann | |
| 18 May 26 |  Re: someone else crimping or me soldering | 3 | Cursitor Doom | |
| 19 May 26 |  Re: someone else crimping or me soldering | 2 | Jeff Liebermann | |
| 19 May 26 |  Re: someone else crimping or me soldering | 1 | Jeff Liebermann |
Les messages affichés proviennent d'usenet.