Sujet : 309SS or ER70S6
De : Snag_one (at) *nospam* msn.com (Snag)
Groupes : sci.engr.joining.welding rec.crafts.metalworkingDate : 23. Jul 2024, 14:03:38
Autres entêtes
Organisation : A noiseless patient Spider
Message-ID : <v7o9n9$17apc$1@dont-email.me>
User-Agent : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:60.0) Gecko/20100101 Thunderbird/60.9.1
My neighbor has asked me to build up a worn spot on the drive pin of his framing nailer . I'm not sure what model it is . The pin has wear on the flat side at the tip , and it appears to be from sliding against the head of the next nail in line . I'm considering using SS for better abrasion resistance . The pin is not particularly hard , can be marked with a file , but "mushrooming" in the repaired area is also a consideration . Replacement pins are available ...
--
Snag
Illegitimi non carborundum
309SS or ER70S6
Re: 309SS or ER70S6