Sujet : Re: kForth serial port interface update
De : sjack (at) *nospam* dontemail.me (sjack)
Groupes : comp.lang.forthDate : 01. Nov 2024, 16:26:03
Autres entêtes
Organisation : A noiseless patient Spider
Message-ID : <vg2rub$39jep$4@dont-email.me>
References : 1
User-Agent : tin/2.6.4-20240224 ("Banff") (Linux/6.8.0-47-generic (x86_64))
Krishna Myneni <
krishna.myneni@ccreweb.org> wrote:
The RS232 serial port interface for kForth (-32/64 for Linux) has been
updated to be able to provide user access to the modem bits e.g. DSR,
CTS etc.
RS-232 is good. I used to have a board called the octopus. It had two
rs-232 connector on both ends to handle all sex. Had pinouts in between
to swap tx/rx and/or tie HTS and CTS to ground or high (I forget).
kForth serial port interface update
Re: kForth serial port interface update